Change the whole ambience and mood in a room with just one touch by Zigbee Scene/Mood Controller.
Set the ambiance as you like and take charge of your mood.
Works with Android & iOS User Applications and is compatible with Amazon Alexa, Google Home & Apple Watch.
It’s Smart, Modular and Easy to Install.
| Dimensions | 45 mm x 48 mm x 45 mm |
| Weight | 100 g |
| Power Output | Does not drive any load directly, triggers scenes over Zigbee Wireless Protocol |
| Power Supply | 85 - 265 V AC, 50 - 60 Hz, 1ph |
|
Networking Interface |
Built in 2.4 GHz Zigbee radio |
| Buttons | 4 Touch Buttons for controlling 4 individual scene/pre-sets |
| Power Method | Communicates with up to 6 wireless touch switches in the same room |
| Maximum TX Power 2.4 GHz | +/- 1.5dBm |
| Antennas 2.4 GHz | Internal PCB Antenna |
| Wireless Security | Supports AES 128-bit Encryption |
| Data Rate | Supports wireless data rates of up to 250 kbitps |
| Mounting | Snaps into switch plate |
| Certifications | RoHS, CE Class A Compliance (Self Declaration) |
Applications
Configuration
Accessories
Applications
- Supports easy one-touch control of up to 4 individual Scene/Pre-set save and implementation wirelessly.
- Has in-built Zigbee and acts as a repeater for Zigbee Mesh Network.
- Retains states of all devices/circuits even during a power cut and is able to load all the scenes under 10 ms on resumption of power.
- Can be accessed in dual mode local only through the same WiFi network as well as through cloud from anywhere in the world for seamless connectivity using Android and iOS Application.
- Supports ease All On/Off Mode for conveniently turning all devices on/off while entering and exiting the room.
- Supports up to 4 mood/scene/favorite profile settings through one click.
- Supports renaming scene names on each mobile/user device.
- Supports change of settings through the cloud from anywhere in the world.
Configuration
- Check NUOS Zigbee Gateway configuration for setting up and configuring the gateway.
- Push the NUOS Touch Switch inside the switch plate till it snap fits. (Ref. Image a and b)
- Connect the Red Wire from behind the switch to the Line/Live wire of the electrical circuit.
- Connect the Black Wire from behind the switch to the Neutral wire of the electrical circuit.
- Connect the Extension Touch switched to the Base Touch Switches through the connectors provided in the box. (Ref. Image c)
- Make sure the wiring connections are tightly secured by insulation/electrical tape to prevent loose connections and arcing behind the switchboard.
- Close the switchboard once the wiring is completed.
- New switches and sensors automatically associate with the gateway on power-up and can be added in the desired room using the user application.
- Please refer to the installation manual for a detailed process with images.
Accessories
- Switch plate of type 2 mod
