Worried about High Electricity bills? NUOS has the perfect Solution for you. Install NUOS Zigbee Motion Sensor in your Restroom, Store, Office or Any space and enjoy power saving and reduced bills.
Works with Android & iOS User Applications and is compatible with Amazon Alexa, Google Home & Apple Watch.
It’s Smart, Modular and Easy to Install.
| Dimensions | 45 mm x 48 mm x 45 mm |
| Weight | 100 g |
| Power Output | Drives up to 2A (500W Resistive) (non-dimmable) |
| Power Supply | 85 - 265 V AC, 50 - 60 Hz, 1ph |
|
Networking Interface |
Built in 2.4 GHz Zigbee variants available |
| Buttons | 4 Touch Buttons for controlling 4 individual scene/pre-sets |
| Power Method | Communicates with up to 6 wireless touch switches in the same room |
| Maximum TX Power 2.4 GHz | +/- 1.5dBm |
| Antennas 2.4 GHz | Internal PCB Antenna |
| Wireless Security | Supports AES 128-bit Encryption |
| Data Rate | Supports wireless data rates of up to 250 kbitps |
| Mounting | Snaps into switch plate |
| Certifications | RoHS, CE Class A Compliance (Self Declaration) |
Applications
Configuration
Accessories
Applications
- PIR (Passive Infrared) based motion sensor allows you to sense motion, almost always used to detect whether a human has moved in or out of the sensor’s range.
- The command of human presence/absence is communicated over Zigbee to the NUOS Zigbee Gateway and the appropriate actions based on the Automatic Mode (turning lights on/off) and the Security Mode (triggering security SMS & In-app Notification) are triggered by the Gateway if the modes are enabled.
- Has in-built Zigbee and acts also as a repeater for Zigbee Mesh Network.
- Can be accessed in dual mode local only through the same WiFi network as well as through the cloud from anywhere in the world for seamless connectivity using Android and iOS Application.
- Supports ease Automatic Mode Enable/Disable from the mobile application.
- Supports easy Off-time to be updated from the mobile application between 1-10 mins.
- Supports ease Security Mode Enable/Disable from the mobile application.
- Supports change of settings through the cloud from anywhere in the world.
Configuration
- Please check NUOS Zigbee Gateway configuration for setting up and configuring the gateway.
- Push the NUOS Sensor inside the switch plate till it snap-fits.
- Connect the Red Wire from behind the sensor to the Line/Live wire of the electrical circuit.
- Connect the Black Wire from behind the sensor to the Neutral wire of the electrical circuit.
- Connect the Yellow Wire to the devices/circuits/load to be driven by the sensor.
- Make sure the wiring connections are tightly secured by insulation/electrical tape to avoid loose connections and arcing behind the switchboard.
- Close the switchboard once the wiring is completed.
- New switches and sensors automatically associate with the gateway on power-up and can be added in the desired room using the user application.
- Please refer to the installation manual for a detailed process with images.
Accessories
- Switch plate of type 2 mod
