NUOS Zigbee Curtain Motor Controller puts your mind at ease by integrating Curtains with NUOS App. No need to leave your Bed when you want to sleep or rest more .
Works with Android & iOS User Applications and is compatible with Amazon Alexa, Google Home & Apple Watch.
It’s Smart, Modular and Easy to Install.
| Dimensions | 45 mm x 48 mm x 45 mm |
| Weight | 100 g |
| Power Output | Drives up to 2A (500W Resistive) per device/Circuit (non-dimmable) |
| Power Supply | 85 - 265 V AC, 50 - 60 Hz, 1ph |
|
Networking Interface |
Built in 2.4 GHz Zigbee radio |
| Buttons | 2 Touch Buttons for Curtain full open/close and mid-stop |
| Power Method | Communicates with up to 6 wireless touch switches in the same room |
| Maximum TX Power 2.4 GHz | +/- 1.5dBm |
| Antennas 2.4 GHz | Internal PCB Antenna |
| Wireless Security | Supports AES 128-bit Encryption |
| Data Rate | Supports wireless data rates of up to 250 kbitps |
| Mounting | Snaps into switch plate |
| Certifications | RoHS, CE Class A Compliance (Self Declaration) |
Applications
Configuration
Accessories
Applications
- Supports control of up to 2 individual curtain motors/window blind in full open/close as well as 1 open/close/mid-stop.
- Has in-built Zigbee and acts as a repeater for Zigbee Mesh Network.
- Retains states of all motors even during a power cut and is able to load all the states under 10 ms on resumption of power.
- Can be accessed in dual mode local only through the same WiFi network as well as through the cloud from anywhere in the world for seamless connectivity using Android and iOS Application.
- Supports ease All On/Off Mode for conveniently turning all motors open/close while entering and exiting the room.
- Supports up to 6 mood/scene/favorite profile settings through one click.
- Supports up to 8 schedules/alarms on devices on and off for automatic device control.
- Supports renaming device names individually on each mobile/user device.
- Supports change of settings through cloud from anywhere in the world.
Configuration
- Check NUOS Zigbee Gateway configuration for setting up and configuring the gateway.
- Push the NUOS Touch Switch inside the switch plate till it snap fits. (Ref. Image a and b)
- Connect the Red Wire from behind the switch to the Line/Live wire of the electrical circuit.
- Connect the Black Wire from behind the switch to the Neutral wire of the electrical circuit.
- Connect the two Yellow Wires to the two devices/circuits/loads to be driven by the switch.
- Connect the Extension Touch switched to the Base Touch Switches through the connectors provided in the box. (Ref. Image c)
- Make sure the wiring connections are tightly secured by insulation/electrical tape to prevent loose connections and arcing behind the switchboard.
- Close the switch board once the wiring is completed.
- New switches and sensors automatically associate with the gateway on power-up and can be added in the desired room using the user application.
- Please refer to the installation manual for a detailed process with images.
Accessories
- Switch plate of type 2,4,6,8,12 mod
